Planetary gearbox

Planetary Gearbox

The Euronorm planetary gearbox units are modular and consists of different types of end stages, gear ratio’s and various input flanges and shafts. The input side of the planetary gearbox units are suitable for IEC motors, couplings and hydraulic motors. The output side also has several options: hollow shafts with shrink disc mounting, cylindrical shafts with keyway or spline. Optionally spline welded bushings or flanges are also possible.
It is possible to make many different combinations, because of the modular construction of the planetary stages. This allows it to almost always create the desired transmission.

Planetaire Reductoren JRP

Output torque of 1.000Nm up to 2.600.000Nm

Shaft sizes of 40mm up to 640mm

Cylindrical shafts, hollow shafts with shrink discs and spline shafts

Ratio's of 1:4 up to 1:30.000

IEC flanges, SAE flanges and cylindrical input shafts (wit key)

Hydraulic brakes

Foot mounting, flange mounting or torque arm mounting

typemaximumshaft size
 torque [Nm][mm]
ENP-010 1.00042
EN-020 2.10065
EN-030 3.80065
EN-045/046 3.80065
EN-065/067 6.40080
JRP-9 22.000120
JRP-10 32.000130
JRP-11 42.000140
JRP-12 60.000160
JRP-13 85.000180
JRP-14 117.000210
JRP-16 164.000230
JRP-17 206.000250
JRP-18 250.000260
JRP-19 300.000280
JRP-20 360.000300
JRP-21 400.000310
JRP-22 456.000330
JRP-23 520.000350
JRP-24 600.000360
JRP-25 700.000380
JRP-26 775.000400
JRP-27 865.000430
JRP-28 965.000450
JRP-29 1.080.000460
JRP-30 1.219.000480


EURONORM DRIVE SYSTEMS +31 (0)252 228850

Engineering Portal

E-mail address


Contact details